Changing The Ne Ip Address; Commissioning Cameras; Commissioning Pmp Microwave; Checking Alarms - Huawei PowerCube 500 PC500-300H1 Quick Manual

14.4

Changing the NE IP Address

During site commissioning, the IP address of the gateway NE needs to be configured in compliance with the external DCN requirements but
other non-gateway NEs use IP addresses that are automatically generated based on NE IDs.
1. Choose Communication > Communication Parameters from the Function Tree.
2. Configure the communication parameters of the NE.
3. Click Refresh.
NOTE
 Do not use the default NE IP address to access the public network (such as Internet).
 The default NE IP address is a temporary address, and is only used for management DCN plug-and-play. The IP address must be
modified in a timely manner.
14.5

Commissioning Cameras

For the camera commissioning method, see the camera document.
14.6

Commissioning PMP Microwave

For the PMP microwave commissioning method, see the PMP microwave document.
14.7

Checking Alarms

1. Choose Configuration > Browse Current Alarms from the Function Tree.
2. Check the displayed alarm information.
Huawei Industrial Base, Bantian, Longgang
Shenzhen 518129 People's Republic of China
14
Huawei Technologies Co., Ltd.
www.huawei.com