American Standard Berwick Series Installation Instructions

Berwick / Boulevard
™
Roman Tub Filler
Thank you for selecting American Standard...
the benchmark of fine quality for over 140 years.
To ensure that your installation proceeds smoothly-please read
these instructions carefully before you begin.
RECOMMENDED TOOLS
ROUGHING-IN DIMENSIONS
286mm
(11-1/4")
1
INSTALL SPOUT
• Apply 4-5 drops of THREADLOCKER (1)
on DIVERTER INSERT (2) threads (supplied).
NOTE: If installing on finished deck, install DIVERTER
INSERT (2) through WASHER (7).
• Thread DIVERTER INSERT (2) carefully until it touches the
installation surface, be sure the RUBBER RING (5)
is properly seated in it's RECESS at the base of the
SPOUT (3).
• Thread SET SCREW (4) using 5 mm hex wrench supplied.
Make certain SET SCREW (4) is properly aligned and tight
so that SPOUT (3) is locked in place.
• Install PLUG BUTTON (6).
Product names listed herein are trademarks of AS America, Inc.
© AS America, Inc. 2018
INSTALLATION
INSTRUCTIONS
®
Phillips Screwdriver
Flat Blade Screwdriver
212mm
(8-3/8")
170mm
(6-3/4")
Turn off hot and cold water
CAUTION
supplies before begining.
T430900
T430901
T431900
T431901
Channel Locks
152-305mm
(6"-8")
52mm
(2")
1" MAX.
(25 mm)
8" TO 16"
FLEXIBLE INSTALLATION
(203 TO 406 mm)
3
1
- 1 -
Certified to comply with ANSI A112.18.1M
Adjustable Wrench
70mm
(2-3/4")
108mm 57mm
(4-1/4") (2-1/4")
6
4
Hex wench
(supplied)
RECESS
5
2
7
Hex Wench
(supplied)
MOUNTING
SURFACE
M965953 (8/18)