Firmware Upgrade Instructions - Sony MPEG4 Video Recorder User Manual

Firmware Upgrade Instructions

(1) Unpacking the box
When unpacking the recorder ensure the following items present.
• one recorder
• one remote controller
• one power adapter
• two AV cables
(2) Connecting the recorder to TV
• Connect the power adapter to the recorder and plug the adapter
to an outlet.
• Connect the AV cable to the AV OUT socket on the recorder.
• Connect the corresponding video and audio connector of the AV
cable to the video and audio input on the TV.
• Turn on the TV and switch to AV mode.
(3) Turning on the recorder
• Unpacking the remote controller and remove the slip inserted
inside the controller.
• Press "Power" on the remote controller.
• The main page presents as the figure 1.
47