Basic Operations
Setting the Code for
non-Sony Preset
Audio and Visual
Components
— Setting
component codes
The Commander is preset at the
factory to operate Sony brand AV
components (see the table below).
If you are using the Commander
with a factory-set Sony
components, skip the following
procedures.
You can use the Commander with
other major brand preset AV
components also. To use with
other AV components, or Sony
components which do not
function with the Commander,
you need to follow the procedures
to set the correct codes for each
component.
Component
Preset
Factory setting
Select button
component(s)
TV
TV
Sony TV
TV/VCR
Combo
DVD
DVD player
Sony DVD
player
SAT
Satellite
Sony satellite
tuner
tuner
CBL
Cable box
Analogue
cable box
VCR
VCR
Sony VHS
VCR
CD
CD player
Sony CD
player
TAPE
Cassette
Sony cassette
deck
deck
AMP
Amplifier
Sony amplifier
Note
An MD player can be set to any of the
above Component Select buttons. You
can assign Component Select buttons to
freely set signals of your desired
components. For further information,
see “Assigning Other Components to
the Component Select Buttons” (page
33) .
For the functions of buttons as for each
component, see “Table of Preset
Functions” (page 39).
GB
10