Download Print this page

Sony RM-LG112 Primary Operating Instructions Manual page 5

Remote commander
Hide thumbs

Advertisement

*
DISPLAY
qf
Press to select the information displayed on
the display of the receiver or TV screen.
Display 2
Select the input, macro list and command
mode of the remote.
Easy scroll key 3
Move to select the input and press to enter
the selection. The components are factory
assigned to the inputs as follows. When you
want to assign other components, program
the remote following the steps on
"Programming the remote" on page 9.
Input(s)
Assigned component(s)
VIDEO 1
VCR (VTR mode 3)
VIDEO 2
VCR (VTR mode 1)
VIDEO 3
VCR (VTR mode 2)
DVD
DVD player
TV/SAT
TV tuner
TAPE
Tape deck (B)
MD/DAT
MD deck
CD/SACD
CD player
TUNER
Built-in tuner
PHONO
Turntable
MULTI
Component connected to the
multi channel input jacks on the
receiver
*
M1, M2
(Macro list)
* For details, see page 13.
See the table on page 8 for information on
the buttons that you can use to control each
component.
Note that the inputs are factory-set
described in the table above. If you want to
change the factory setting of the buttons to
match your particular components, do the
procedure "Programming the remote" on
page 9.
ENTER (After pressing ALT) 7
After selecting a channel, disc or track
using the numeric buttons, press to enter the
valve.
*
6
JUMP/TIME
If you selected TV:
Press to toggle between the previous and
the current channels.
If you selected CD player, video CD
player, or DVD player:
Press to display the time information.
MAIN MENU qd
Press to select the menu of the receiver.
MASTER VOL +/– qs
Press to adjust the volume level of all
speakers at the same time.
MOVIE 4
Press to select the sound fields for movies.
MUSIC 5
Press to select the sound fields for music.
MUTING q;
Press to mute the sound.
Numeric buttons (1–9, 0/10)
pressing ALT) qj
If you selected tuner:
Use with SHIFT to select tuner preset
station numeric input during DIRECT
TUNING or MEMORY mode.
If you selected CD player, video CD
player, DVD player, MD deck, or DAT
deck:
Press to select track numbers. 0/10 selects
track 10.
If you selected TV, VCR, or satellite
tuner:
Press to select channel numbers.
* The function of these buttons switch automatically
as
each time you select the input with the easy scroll key
(3). Depending on the component, the above
operation may not be possible or may operate
differently than described.
*
(After
continued
GB
5

Hide quick links:

Advertisement

loading