Sony Trinitron KV-21V4U Operating Instructions Manual page 2

Sony colour video tv operating instructions
Hide thumbs Also See for Trinitron KV-21V4U:
Table of Contents

Advertisement

WARNING
To prevent fire or shock hazard, do not expose the unit to
rain or moisture.
Dangerously high voltages are present inside the set. Do
not open the cabinet. Refer servicing to qualified
personnel only.
Caution
Television programmes, films, video tapes and other
materials may be copyrighted.
Unauthorized recording of such materials may be
contrary to the provisions of the copyright laws.
Colour System of Your
Set
This video TV is designed to receive TV programmes
based on PAL (I) colour system and to record and play on
PAL colour system. Also, the video TV can play tapes on
NTSC colour system.
Precautions
Safety Information
For general safety:
Do not expose the unit to rain or moisture.
Do not open the rear cover.
For safe operations:
Do not operate the unit on anything but 220-240 V AC.
Do not operate the unit if any liquid or solid object falls
in it—have it checked immediately.
Unplug the unit from the wall outlet if you do not
intend to use it for an extended period of time. To
disconnect the cord, pull it out by the plug, never by the
cord.
NOTICE FOR CUSTOMERS IN THE UNITED
KINGDOM
A moulded plug complying with BS1363 is fitted to this
equipment for your safety and convenience.
Should the fuse in the plug supplied need to be replaced,
a 5 AMP fuse approved by ASTA or BSI to BS 1362 (i.e.
marked with 2 or @ must be used.
When an alternative type of plug is used it should be
fitted with a 5 AMP FUSE, otherwise the circuit should
be protected by a 5 AMP FUSE at the distribution board.
If the plug supplied with this equipment has a detachable
fuse cover, be sure to attach the fuse cover after you
change the fuse. Never use the plug without the fuse
cover. If you should lose the fuse cover, please contact
your nearest Sony service station.
For safe installation:
Do not block the ventilation openings.
Do not install the unit in hot, humid, or excessively dusty
places.
Do not install the unit where it may be exposed to
mechanical vibrations.
Position the unit so that there is a clear space of 10 cm
from a wall, allowing you to press the U (MAIN
POWER) switch to turn it on and off completely.
For your protection, refer all servicing to qualified
personnel.
IMPORTANT
r
If the plug supplied is not suitable for the socket outlets
in your home, it should be cut off and an appropriate
plug fitted in accordance with the following instructions:
The wires in this mains lead are coloured in accordance
with the following code:
Blue
Brown
As the colours of the wires in the mains lead of this
apparatus may not correspond with the coloured
markings identifying the terminals in your plug, proceed
as follows:
The wire which is coloured blue must be connected to the
terminal which is marked with the letter N or coloured
black. The wire which is coloured brown must be
connected to the terminal which is marked with the letter
L or coloured red. Do not connect either wire to the earth
terminal in the plug which is marked by the letter E or by
the safety earth symbol Y or coloured green or green and
yellow.
WARNING
r
To prevent shock hazard, do not insert the plug cut off
from the mains lead into a socket outlet. This plug
cannot be used and should be destroyed.
To prevent fire or shock hazard, do not expose the unit to
r
rain or moisture.
Dangerously high voltages are present inside the set. Do
r
not open the cabinet. Refer servicing to qualified
personnel only.
How to replace the fuse
Open the fuse compartment with a blade screwdriver, and
FUSE
replace the fuse.
Neutral
Live
Getting Started
GB
2

Advertisement

Table of Contents
loading

Table of Contents