Using the Menus
Using the Sound Settings
Enjoy stereo, bilingual
and mono programs
Determines whether to apply Sound Settings to current input only, or to all inputs.
Settings will be applied to "All Inputs" (ex: TV is showing Video 1.
Changes to the picture settings affect TV, Video1 - Video7)
"All Inputs" will override any settings set by "Current Input."
Settings will be applied to only the "Current Input" (ex: TV is showing
Video 1. Changes to picture settings affect only Video 1)
Select to enhance treble and bass.
Suitable for spoken dialog.
Flat setting. Allows you to store your preferred settings.
Sound Mode can also be accessed using the TOOLS button on the remote
control when in Analog TV, Digital TV and External Inputs.
Resets the current Sound Mode setting to the default values, except MTS.
Adjust to increase or decrease higher-pitched sounds.
Adjust to increase or decrease lower-pitched sounds.
Adjust to emphasize left or right speaker balance.
Select to stabilize the volume across all programs and commercials.
Select to turn off Steady Sound.
Select for surround sound (for stereo programs only).
Simulated Stereo Adds a surround-like effect to mono programs.
Select for normal stereo or mono reception.
Select to give sound more impact by compensating for phase effects in speakers. Select from
High, Low, and Off.
Select for stereo reception when viewing a program broadcast in stereo.
Select to automatically switch the TV to second audio programs when a
signal is received. If no SAP signal is present, the TV remains in
Select for mono reception. Use to reduce noise during weak stereo
MTS is only available for analog programs.