Using A Bi-Amplifier Connection - Sony STR-DH800 Operating Instructions Manual

Recording onto a recording
media
1
Press one of the input buttons
to select the playback
component.
You can also use INPUT SELECTOR on
the receiver.
2
Prepare the playback
component for playing.
For example, insert the video tape you
want to copy into the VCR.
3
Prepare the recording
component.
Insert a blank video tape, etc. into the
recording component (VIDEO 1) for
recording.
4
Start recording on the
recording component, then
start playback on the playback
component.
Note
Some sources contain copy guards to prevent
recording. In this case, you may not be able to record
from the source.
Using a bi-amplifier
connection
If you are not using surround back speakers,
you can connect the front speakers to the
SPEAKERS SURROUND BACK/BI-AMP/
FRONT B terminals using a bi-amplifier
connection.
To connect speakers
Front speaker
(R)
Hi
ANTENNA
AM
IN 4
EZW-T100
ASSIGNABLE (INPUT ONLY)
Lo TV DIGITAL (ASSIGNABLE)
IN 3 IN 2 IN 1 MONITOR
OUT DMPORT
DC5V
Y
0.7A MAX IN SAT BD
IN IN
OPTICAL OPTICAL COAXIAL
P / B
C B
VIDEO VIDEO VIDEO VIDEO VIDEO
IN IN OUT IN OUT
P R /
C R
SURROUND BACK/
COMPONENT VIDEO ASSIGNABLE (INPUT ONLY) AUDIO AUDIO AUDIO AUDIO MONITOR BI-AMP/
FRONT B
OUT IN IN IN IN OUT IN
L
AUDIO R
OUT
R
SA-CD/CD/CD-R TV SAT BD VIDEO 1 SUBWOOFER
CENTER
SURROUND BACK/
BI-AMP/
FRONT B
R L
SPEAKERS
Connect the jacks on the Lo (or Hi) side of the
front speakers to the SPEAKERS FRONT A
terminals, and connect the jacks on the Hi (or
Lo) side of the front speakers to the
SPEAKERS SURROUND BACK/BI-AMP/
FRONT B terminals.
Make sure that metal fittings of Hi/Lo attached
to the speakers have been removed from the
speakers. Not doing so may cause a
malfunction of the receiver.
Front speaker
(L)
Hi
HDMI
IN 3 (for AUDIO) IN 2 IN 1 OUT
Lo
DVD
IN
CENTER SURROUND
R L
FRONT A
L R L
SPEAKERS
SURROUND
R L
FRONT A
R L
continued
91 GB