Overview Of The Menus - Sony STR-DH800 Operating Instructions Manual

Overview of the menus

The following options are available in each
menu. For details on navigating through
menus, see page 44.
Menu Parameters
[Display] [Display]
AUTO CAL Auto calibration
[AUTO CAL] [A.CAL START]
(page 37)
Calibration type
[CAL TYPE]
Position
[POSITION]
Naming inputs
[NAME IN]
LEVEL Test tone
[LEVEL] [TEST TONE]
(page 49)
Phase noise
[P. NOISE]
Phase audio
[P. AUDIO]
Front left speaker level
[FL LEVEL]
Front right speaker level
[FR LEVEL]
Center speaker level
[CNT LEVEL]
Surround left speaker level
[SL LEVEL]
Surround right speaker level
[SR LEVEL]
Surround back speaker level
[SB LEVEL]
Surround back left speaker level
[SBL LEVEL]
Surround back right speaker
level
[SBR LEVEL]
Subwoofer level
[SW LEVEL]
Dynamic range compressor
[D. RANGE]
a)
a)
a)
a)c)
a)c)
a)c)
c)
c)
c)
c)
c)
c)
c)
c)
a)
Settings
FULL FLAT, ENGINEER
FRONT REF, OFF
POS. 1, POS. 2, POS. 3
For details, see "To name the
position" (page 38).
b)
OFF, FIX xxx , AUTO xxx
OFF, FL/SR, SL/FL, SB/SL, SBL/SL,
SBR/SBL, SR/SB, SR/SBR, SR/SL,
FR/SR, FR/SL, FL/FR, CNT/FR,
FL/CNT
OFF, FL/SR, SL/FL, SB/SL, SBL/SL,
SBR/SBL, SR/SB, SR/SBR, SR/SL,
FR/SR, FR/SL, FL/FR, CNT/FR,
FL/CNT
FL –10 dB to FL +10 dB
(0.5 dB per step)
FR –10 dB to FR +10 dB
(0.5 dB per step)
CNT –20 dB to CNT +10 dB
(0.5 dB per step)
SL –20 dB to SL +10 dB
(0.5 dB per step)
SR –20 dB to SR +10 dB
(0.5 dB per step)
SB –20 dB to SB +10 dB
(0.5 dB per step)
c)
SBL –20 dB to SBL +10 dB
(0.5 dB per step)
SBR –20 dB to SBR +10 dB
(0.5 dB per step)
SW –20 dB to SW +10 dB
(0.5 dB per step)
COMP. MAX, COMP. STD,
COMP. AUTO, COMP. OFF
Initial
setting
FULL FLAT
POS. 1
b)
OFF
OFF
OFF
0 dB
0 dB
0 dB
0 dB
0 dB
0 dB
0 dB
0 dB
0 dB
COMP. AUTO
continued
45 GB