Selecting a Sound Field
You can enjoy surround sound simply by selecting one of
the pre-programed sound fields according to the program
you want to listen to.
1
Press MODE.
The current sound field is indicated in the display.
2
Turn the jog dial or press the cursor buttons (
or
) to select the sound field you want.
See the table starting on page 29 for information on
each sound field.
To turn the sound field off
Press A.F.D. or 2CH (page 24).
z
The receiver memorizes the last sound field selected for each
program source (Sound Field Link)
Whenever you select a program source, the sound field that was
last applied is automatically applied again. For example, if you
listen to CD with SMALL HALL as the sound field, change to a
different program source, then return to CD, SMALL HALL will
be applied again. With the tuner, sound fields are memorized
separately for AM, FM, and all preset stations.
z
You can identify Dolby Surround-encoded software by
looking at the packaging
Dolby Digital discs are labeled with the
logo, and Dolby
Surround encoded programs are labeled with the A
logo.
Page 28