To Avoid Short-Circuiting The Speakers; Examples Of Poor Conditions Of The Speaker Cord; To Avoid Damaging Your Speakers - Sony STR-DE675 Operating Instructions Manual

Hi-fi receivers: fm stereo/fm-am receiver
Hide thumbs Also See for STR-DE675:
Table of Contents

Advertisement

Available languages

Available languages

To avoid short-circuiting the speakers

Short-circuiting of the speakers may damage the receiver.
To prevent this, make sure to take the following
precautions when connecting the speakers.
Make sure the stripped ends of each speaker cord
does not touch another speaker terminal or the
stripped end of another speaker cord.

Examples of poor conditions of the speaker cord

Stripped speaker cord is touching another speaker terminal.
Stripped cords are touching each other due to excessive
removal of insulation.
After connecting all the components, speakers,
and AC power cord, output a test tone to check
that all the speakers are connected correctly. For
details on outputting a test tone, see page 20.
If no sound is heard from a speaker while outputting a
test tone or a test tone is output from a speaker other than
the one whose name is currently displayed on the
receiver, the speaker may be short-circuited. If this
happens, check the speaker connection again.

To avoid damaging your speakers

Make sure that you turn down the volume before you
turn off the receiver. When you turn on the receiver, the
volume remains at the level you turn off the receiver.
GB
Page 15

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents