Creating Your Own Program (Program Play) - Sony SCD-C333ES Operating Instructions Manual

Creating Your Own
Program
(Program Play)
You can pick out the tracks that you like and specify the
playback order in a program containing up to 32 tracks.
CONTINUE
DISC
Number
buttons
>10
CHECK
H
./>
1
Press PROGRAM in stop mode.
"PROGRAM" appears in the display.
2
Press DISC.
Cursor flashes in the display.
3
Press the number button of the disc.
The selected disc number appears in the display.
4
Press ENTER.
When you want to program the whole disc as one
step, skip Steps 5 to 6, and go to Step 7.
5
Press the number buttons to enter the track
number.
If you entered the wrong track number
Press CLEAR to erase the track number and reenter
the correct track number using the number buttons.
To select a track number over 11
Press >10 (page 16).
6
Press ENTER.
7
Repeat steps 2 to 6 to enter other tracks.
8
Press H.
Program Play starts.
To resume normal play
Press CONTINUE.
z
While the disc tray is open, follow Steps 1 to 8 with pressing the
DISC SKIP button to check the disc labels. If you close the disc
tray before Step 8, the total playing time appears in the display
PROGRAM
after a while.
Note that, if the programmed track number isn't found on the
disc, that step is automatically erased.
z
Press H to play from the beginning of the program again.
ENTER
The program remains even if you stop play.
CLEAR
z
If you replace discs, the programmed disc and track numbers
remain. So, the player plays only the existing disc and track
numbers. However, the disc and track numbers that aren't found
in the player or on the disc are deleted from the program, and the
rest of the program is played in the programmed order.
Notes
• When tracks which are not numerically consecutive on the disc
• If you turn off the player, disconnect the mains lead, or press
Checking the contents of the program
Before you start playing or while the player is playing,
press CHECK.
Each time you press the button, the track numbers will
appear in the display in the programmed order.
When you press CHECK while the player is playing, the
track number appears from the next track numbers of the
current playing track number.
Changing the contents of the program
You can change the contents of the program in stop mode.
You can create your program while checking the disc labels
The program remains even after Program Play ends
The program remains until you erase it
are programmed consecutively (i.e. 1, 3, 5, etc.), the actual
playing time may become longer than the total playing time.
A OPEN/CLOSE the program will be erased.
19
GB