Locating A Specific Track; Locating A Particular Point In A Track - Sony SCD-C333ES Operating Instructions Manual

Super audio cd player
Hide thumbs Also See for SCD-C333ES:
Table of Contents

Advertisement

Available languages

Available languages

Locating a Specific Track

During stop or play mode, you can locate any track to be
played.
lAMSL
To locate
You need to
The next or
Turn l AMS L clockwise until
you find the track. When using the
succeeding tracks
remote, press > repeatedly until
you find the track.
The current or
Turn l AMS L
preceding tracks
counterclockwise until you find the
track. When using the remote, press
. repeatedly until you find the
track.
A specific track directly
Turn l AMS L until you find
the track number you want. When
using the remote, press . or >
repeatedly until you find the track.
Locating a track directly by entering the
track number Z
Press the number button(s) to enter the track number.
z
To enter a track number over 11 Z
1
Press >10.
2
Enter the corresponding digits.
To enter 0, press 10/0 instead.
Examples:
• To play track number 30, press >10, then 3 and 10/0.
• To play track number 100, press >10 twice, then 1, and 10/0
twice.
16
GB
Number
buttons
>10
./>
Locating a Particular Point
in a Track Z
You can locate a particular point in a track during play or
play pause.
lAMSL
Locating a point while monitoring the
sound (Search)
Press and hold m/M during play.
You will hear intermittent playback as the disc goes
forward or reverses.
When you reach the desired point, release the button.
Locating a point by observing the time
indication (High-Speed Search)
Press m/M during play pause.
You will not hear the playback sound.
z
When "Over!!" appears in the display
The disc has reached its end. Press . or m to go back.
Note
Tracks that are only a few seconds long may be too short for
monitoring. In this case, the player may not search correctly.
Locating a point by setting the start time
(Time Search)
1. Turn l AMS L or press ./> to select the
desired track in stop mode.
2. Press m/M to set the time to start play while
looking at the display.
You can set the time from the beginning of the desired a
track when you press M at first, and set the time from
the end of the desired track backward's when you press
m at first.
ALL
DISCS
1
2
3
DISC
TRACK
MIN
1
5
2 . 5 7
3. Press H.
Play will start at the time search.
H
./>
m/M
4
5
S A C D
SEC
1 2 3 4 5
6 7 8 9 10

Advertisement

Table of Contents
loading

Table of Contents