Electrolux EPPWELGM5 Service Manual page 147

EPPWWELGM



6. Switch OFF and then switch ON the machine.

7. Switch OFF and then switch ON the machine.
WARNING:
To set the board parameters , carefully follow the order given in this programming file, from point 1 to
point 7.
WARNING:
When modifying parameter , all the parameters (except those belonging to the  family)
assume the default values according to the tables in section 11 DEFAULT VALUES. The parameters of
the  family are not modified.
DOC. NO. 5956.65J.00
EFS - Dishwashing Systems Platform
Electrolux Professional
Drain parameters family.
 
Initial Drain Phase Duration [s].
 
Final Drain Phase Duration [s].
 
Drain and cleaning mode.
 
Wash tank water change frequency control disabled.
 
Drain cycle Timeout.
Set other parameters.
 
Initial Pause [s] (for ALL cycles).
 
Delay for the 2
 
Drain Phase Duration at the end of washing phase [s].
 
Duration of pause after the rinse cycle [s] (for ALL cycles).
 
Degrees Celsius display.
 
During the rinse stage, the display shows the boiler temperature.
 
Termal Label mode disabled (Functions present with firmware version 4.04).
Enter into HCP parameter family and set the following parameters.
 
Machine arranged for remote connection to PC.
Enter into GEn parameter family.
 
Initial Detergent Dosage.
 
Initial Rinse Aid Dosage.
 
Detergent dispensing during the wash cycle (loading during wash stage).
 
Rinse aid dispensing during the rinse cycle (loading during boiler filling stage).
nd
wash pump [s].
PROG 167
P. 147 / 174