Euc3Ddmcd - Electrolux EPPWELGM5 Service Manual

EUC3DDMCD

1. Switch OFF and then switch ON the machine.

2.
3. Switch OFF and then switch ON the machine.
4. Modify Factory parameters:

5. Modify the cycle parameters:



DOC. NO. 5956.65J.00
EFS - Dishwashing Systems Platform
Electrolux Professional
Enter into CFG parameter family and set the following parameters:
 
Hood Type and undercounter.
 
Pressure boiler.
 
Front loading function.
 
Default values for Undercounter models.
 
SOFT START enabled.
 
Tank heater works only if boiler temperature reached.
 
The tank is filled into the traditional way.
 
Detergent level switches not enabled.
 
Select user interface for LS5.
 
Regeneration cycle disabled.
 
Alarms not enabled.
 
Boiler electronic level sensor.
 
Resin regeneration cycle forcing.
 
Rinse water max. hardness.
 
Boiler heating control.
Enter into FAC parameter family and set the following parameters.
  
Boiler Temperature Threshold.
 
Boiler temperature: alarm threshold.
 
Boiler Temperature Adjust.
 
Boiler standby function enabled.
 
Booster Function.
 
During stand-by boiler is kept at lower temperature than Temperature Threshold.
 
Tub Temperature: Threshold.
 
Tank temperature: alarm threshold.
Cycle 1 parameters family.
 
Long Wash Phase [min].
 
Short Wash Phase [s].
 
Pause [s].
 
Rinse Phase Duration [s].
 
Drain [s].
 
Final Pause [s].
Cycle 2 parameters family.
 
Long Wash Phase [min].
 
Short Wash Phase [s].
 
Pause [s].
 
Rinse Phase Duration [s].
 
Drain [s].
 
Final Pause [s].
Cycle 3 parameters family.
 
Long Wash Phase [min].
 
Short Wash Phase [s].
 
Pause [s].
 
Rinse Phase Duration [s].
 
Drain [s].
 
Final Pause [s].
 
Boiler Temperature Threshold for Cycle 3.
PROG 165
P. 142 / 174