Specifications - Hitachi CG36DA Handling Instructions Manual

SPECIFICATIONS

POWER TOOL
Model
Voltage
Pole type
Cutting capacity diameter
Rotation direction
No-load speed
Operating time on one charge*
(When supplied rechargeable battery is
fully charged)
Battery available for this tool**
Weight (with nylon head, rechargeable
battery, shoulder belt and cover)
* The data in the above table is provided only as an example. Since type of grass, ambient temperature, rechargeable
battery characteristics, work methods, etc. can vary widely the above should only be used as a rough guideline.
Conditions: Outer diameter of nylon head 310 mm, speed dial set to Normal or High. (lever left ON all the time)
** Existing batteries (BSL3660/3620/3626, BSL18xx series, etc.) cannot be used with this tool.
BATTERY
Model
Voltage 36 V / 18 V (Automatic Switching*)
Battery capacity
Available cordless
products**
Available charger
* The tool itself will automatically switch over.
** Please see our general catalogue for details.
CHARGER
Model
Charging voltage
Weight
STANDARD ACCESSORIES
In addition to the main unit (1 unit), the package contains the
accessories listed on page 20.
Standard accessories are subject to change without notice.
OPTIONAL ACCESSORIES (sold
separately) (Page 21)
Optional accessories are subject to change without notice.
APPLICATIONS
Trimming, scaling and mowing of weed.
BSL36A18
2.5 Ah / 5.0 Ah
(Automatic Switching*)
Multi volt series, 18V product
Sliding charger for lithium ion
batteries
UC18YSL3
14.4 V – 18 V
0.6 kg
CG36DA CG36DA(L)
Straight type
Counterclockwise as seen from above
5.4 kg 5.1 kg
BATTERY REMOVAL/INSTALLATION
1. Battery removal
Hold the housing tightly and push the battery latches to
remove the battery (see Fig. 3).
CAUTION
Never short-circuit the battery.
2. Battery installation
Insert the battery while observing its polarities (see
Fig. 3).
CHARGING
Before using the power tool, charge the battery as follows.
1. Connect the charger's power cord to the receptacle.
When connecting the plug of the charger to a receptacle,
the charge indicator lamp will blink in red (At 1- second
intervals).
2. Insert the battery into the charger.
Firmly insert the battery into the charger as shown in
Fig. 4 (on page 2).
3. Charging
When inserting a battery in the charger, the charge
indicator lamp will blink in blue.
When the battery becomes fully recharged, the charge
indicator lamp will light up in green. (See Table 1)
(1) Charge indicator lamp indication
The indications of the charge indicator lamp will be as
shown in Table 1, according to the condition of the
charger or the rechargeable battery.
12
CG36DTA
36 V
Extendable type
310 mm
5800 – 7000 /min
BSL36A18
42 min (Normal)
18 min (High)
BSL36A18
5.8 kg
CG36DTA(L)
5.5 kg