Press CD (P (P on the
remote). Press again to resume
Select a track
During play or pause, turn the
jog dial clockwise (to go
forward) or counterclockwise
(to go back) and release it
when you reach the desired
track. (Or press + (to go
forward) or = (to go back)
on the remote.)
Press and hold down ) or
Find a point in
0 during play and
release it at the desired point.
Select a CD
Press a DISC 1~3 button or
in stop mode
Play only the
Press PLAY MODE
CD you have
repeatedly until "1 DISC"
Play all CDs
Press PLAY MODE repeatedly
until "ALL DISCS" appears.
Remove the CD Press §.
Press DISC SKIP/
Turn VOLUME +/– (or press
VOL +/– on the remote).
• Pressing CD (P when the power is off
automatically turns the power on and starts CD
playback if there is a CD in the tray (One Touch
Play). When the system is in the Power Saving
Mode, the One Touch Play function does not
• You can switch from another source to the CD
player and start playing a CD just by pressing
CD (P or the DISC 1~3 buttons (Automatic
• If there is no CD in the player, "CD NO DISC"
appears in the display.
• When a disc tray holding a CD is selected (or
playing), the DISC 1~3 button for that tray lights
green. When a disc tray holding a CD is not
selected, the DISC 1~3 button for that tray lights
orange. When all disc trays are empty, the DISC
1~3 buttons all light green.