Sony MHC-GRX10AV Operating Instructions Manual page 35

Sony operating instructions mini hi-fi component system mhc-grx10av, mhc-rx110av
Table of Contents

Advertisement

Using the BEAT JAM
function
This function automatically synchronizes the
sounds of PAD A and B with the sound
source.
1
Start playing a source.
2
Press BEAT JAM repeatedly to
select the jam mode you desire.
The button's indicator lights up. Every
time you press the button, the display
changes as follows:
.
PAD MODE
.
RANDOM MODE
.
JAM OFF
PAD MODE
This mode emphasizes the rhythm of the
source by playing the sound stored at PAD A
in sync with the bass and playing the sound
stored at PAD B in sync with the treble.
RANDOM MODE
This mode emphasizes the rhythm of the
source by playing random sounds (from the
drum pad library) in sync with source.
Note
BEAT JAM cannot be used at the same time as the
BEAT (BEAT ON) function. When BEAT JAM is
turned ON, BEAT turns OFF automatically.
Likewise, when the BEAT is turned ON, BEAT JAM
turns OFF automatically.
Using the AUTO BPM
function
This function automatically synchronizes the
rhythm of the current beat pattern with the
sound source.
1
Start playing a source.
2
Select a beat pattern.
(See "To change the beat pattern" on
page 34.)
3
Press BEAT ON/OFF to stop the
beat function.
4
Press AUTO BPM.
The button's indicator blinks orange
while measuring the source's BPM. Once
measured, the indicator lights green.
5
Listen to the sound source and press
BEAT ON/OFF at the downbeat.
The rhythm of the beat pattern starts in
sync with the source.
Tip
If the downbeat of the rhythm does not match the
source, press BEAT ON/OFF to turn the beat off.
Then, in time with the source, press BEAT ON/OFF
again to restart the beat.
Notes
• AUTO BPM may not work with certain songs
(such as those with varying tempos). In such cases,
the AUTO BPM indicator continues blinking
orange and "AUTO BPM NG" appears in the
display.
• The amount of time required to measure a song's
BPM (after pressing AUTO BPM) varies for each
song.
• AUTO BPM stops automatically when it
encounters a blank of (or greater than) 1.5 seconds.
It will, however, resume automatically when the
music begins again.
• AUTO BPM stops automatically when you turn
the jog dial while holding BEAT SPEED.
35

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mhc-rx110av

Table of Contents