Table of Contents
Advertisement
Creating a party
atmosphere
— X-TRANCE
You can create a party atmosphere by
using X-TRANCE.
To
Do this
Flash the sound
Hold down SOUND
output
FLASH during playback.
(The sound cuts
To cancel the effect,
off periodically)
release SOUND FLASH.
Change the
Hold down SOUND
sound flash
FLASH and turn
speed (1~20)
OPERATION DIAL.
Create a deep
Press FLANGER
flanging effect
repeatedly to select
that is similar to
“FLANGER ON”.
the roar of a jet
plane
Create a “live”
Press DELAY repeatedly
sound with full
to select “DELAY ON”.
characteristic
reverb effect
Create a slow
Press CHORUS
and deep chorus
repeatedly to select
effect
“CHORUS ON”.
Notes
• The FLANGER, DELAY or CHORUS sound
effect is automatically turned off when you:
– turn off the system.
– change the function.
sound
– select other
effect.
• If you activate FLANGER, DELAY or
CHORUS during recording/transferring, the
sound effect will be recorded onto the tape or
transferred onto the USB device. However,
these sound effect will not be transferred onto
the USB device during CD function.
Changing the display
1
Press OPTIONS.
2
Turn OPERATION DIAL to select
the item you want, then press
ENTER
The last selected item setting appears
in the display.
ILLUM
Change the illumination pattern
around MASTER VOLUME.
METER BACKLIGHT
Change the meter backlight pattern.
METER POINTER
Change the meter pointer pattern.
DISPLAY
Change the front panel display pattern.
3
Turn OPERATION DIAL to select
the setting you want.
4
Press ENTER.
5
Repeat steps 2 to 4 to make
other settings.
To exit the OPTIONS menu
Press OPTIONS again.
GB
Page 31
- Quick Links:
- Guide to Parts and Controls
- Specifications
Hide quick links:
Advertisement
Table of Contents
