Recording A Cd - Sony LBT-D590 Operating Instructions Manual

Recording a CD

— CD Synchro Recording
This function lets you record from a CD to a
tape easily. You can use TYPE I (normal) or
TYPE II (CrO ) tapes. The recording level is
2
adjusted automatically.
1
SURROUND
7
DOLBY NR
1
Press POWER (I/u for LBT-D990/
XB30) to turn on the power.
2
Press 6 EJECT and insert a blank
tape into deck B.
ª ª
p 0 )
6
3
Press 6 OPEN and place a CD.
With the label
side up.
When you play
a CD single,
place it on the
inner circle of
the tray.
12
8
ª
p
p
4 3 5
With the side you want to
record on facing forward
ª ª
p 0 )
P r
6
ª ª ª
p 0 ) p
P
6 6
6
P
0
4
Close the front cover.
5
Press DISC SKIP repeatedly until
the disc number you want to record
appears in the playing position
indicator.
6
Press CD SYNC.
6
Deck B stands by for recording and the
CD player stands by for playback, and
the indicator on the · button (for the
front side) lights up green.
7
Press DIRECTION repeatedly to
select A to record on one side or
ß (or RELAY) to record on both
sides.
8
Press P on deck B.
Recording starts.
To stop recording
Press p on deck B or on the CD player.
Tips
• If you want to record on the reverse side, press ª
so the indicator on the ª button (for the reverse
2
side) lights up green.
• When you record on both sides, be sure to start
from the front side. If you start from the reverse
side, recording stops at the end of the reverse side.
• When you want to reduce the hiss noise in low-
level high-frequency signals, press DOLBY NR
before step 8 so "DOLBY NR B" appears in the
display.
• To record with the surround effect, press
SURROUND so "SUR
display.
The equalizer settings will not be recorded.
Note
You cannot listen to other sources while recording.
ª
0 )
r
ª
p
)
" appears in the