Advertisement
with the tube. Slightly turn the yoke clockwise to lock into
place. Secure this locked position with thumb and forefinger.
5. Tighten the yoke screw until the chamber on the upper
3. Tighten the wing nut closest to the tube first, then tighten the other one. Nuts must be
shoulder of the spreader is bearing on the tube.
securely tightened so there is no chance of the tube slipping.
4. Slide the yoke over the bar and line up the swaging spreader with the tube. Slightly
turn the yoke clockwise to lock into place. Secure this locked position with thumb and
forefinger
5. Tighten the yoke screw until the chamber on the upper shoulder of the spreader is
bearing on the tube.
PARTS LIST
70853-3 70853-2 70853-1 70753
2
70053
70553
�������
7/16 1/4 1/8 3/16 5/16 3/8
70451
3/4
���� ������ �������
70451
70653
70053-PB
70153
1/2
5/8
70253
70053-INST
Advertisement
