Step 3: Presetting Radio Stations - Sony CMT-EX1 Operating Instructions Manual

Step 3: Presetting radio
stations
You can preset the following number of stations:
– 20 for FM, 10 for AM.
2
3,4
1
Press ?/1 to turn on the system.
2
Press TUNER/BAND repeatedly until
the band you want appears in the
display.
Each time you press the button, the band
changes as follows:
FM y AM
3
Press TUNING MODE repeatedly until
"AUTO" appears.
4
Press +/– (or TUNING +/– on the unit).
The frequency indication changes and
scanning stops when the system tunes in a
station. "TUNED" and "STEREO" (for a
stereo program) appear. When you want to
stop scanning, press TUNING MODE.
5
6
1
4,6
7
5
6
To tune in the station manually
1 Press TUNING MODE repeatedly until
"MANUAL" appears in step 3.
2 Press +/– (or TUNING +/– on the unit)
repeatedly to tune in the station and continue
from step 5.
To change the preset number
Start over from step 2.
Press MEMORY.
A preset number flashes.
Proceed to step 6 while the preset number is
flashing. If the unit is not operated for more
than 16 seconds, the preset number
disappears and the unit returns to the status
of step 3. If this happens, start over from
step 4.
Press +/– to select the preset number
you want then press ENTER.
The station is stored.
Select 1 to 20 for FM, and select 1 to 10 for
AM.
Repeat steps 2 to 6 to preset other
stations.
continued
7