Using Only The Front Speakers (2Ch Stereo); Listening To The Sound Without Any Adjustment (Analog Direct) - Sony STR-DG700 Operating Instructions Manual

Using only the front
speakers
(2CH STEREO)
In this mode, the receiver outputs the sound
from the front left/right speakers only. There is
no sound from the sub woofer.
Standard 2 channel stereo sources completely
bypass the sound field processing and multi
channel surround formats are downmixed to 2
channel.
MULTI CH
2CH
2CH
SLEEP FM MODE D. TUNING AUTO CAL
Press 2CH.
Note
No sound is output from the sub woofer in the 2CH
STEREO mode. To listen to 2 channel stereo sources
using the front left/right speakers and a sub woofer,
select "A.F.D. AUTO" (page 52).
56 GB
A.F.D. MOVIE MUSIC
Listening to the sound
without any adjustment
(ANALOG DIRECT)
You can switch the audio of the selected input
to two channel analog input. This function
enables you to enjoy high quality analog
sources.
When using this function, only the volume and
front speaker balance can be adjusted.
?/1
TUNING MODE
– +
TUNING
SPEAKERS
(OFF/A/B/A+B)
AUTO CAL MIC
MEMORY/
ENTER DIMMER
VIDEO 3 IN/PORTABLE AV IN
PHONES
VIDEO L AUDIO R DIGITAL(OPT)
1
Turn INPUT SELECTOR on the
receiver to select the input you
want to listen to in analog
audio.
You can also use the input buttons on the
remote.
2
Press DIRECT on the receiver.
The analog audio is output.
Note
When headphone is connected, "HP DIR" appears
on the display.
MASTER VOLUME
MULTI CHANNEL DECODING
DISPLAY INPUT MODE
INPUT SELECTOR
SUR BACK
SLEEP DECODING 2CH A.F.D. MOVIE MUSIC MULTI CH IN
1
DIRECT
2