Adjusting The Speaker Levels And Balance; Test Tone - Sony STR-DB900 Operating Instructions Manual

Adjusting the speaker
levels and balance

— TEST TONE

Use the remote while seated in your listening
position to adjust the level of each speaker.
1
Press ?/1 to turn on the receiver.
2
Press TEST TONE.
"T.TONE" appears in the display and a test
tone is output from each speaker in the
following sequence:
r
Front (left)
r
Center
r
Front (right)
r
Surround (right)
r
Surround (back)
r
Surround (left)
r
Subwoofer
3
Adjust the LEVEL parameters so that
the level of the test tone from each
speaker sounds the same when you
are in your main listening position.
To adjust the balance and level of speakers,
press MAIN MENU repeatedly to select
LEVEL menu, then press F/f to select the
parameter you want to adjust (page 26).
Next, press G/g to select a setting.
4
Press TEST TONE again to turn off the
test tone.
Tip
You can adjust the level of all speakers at the same
time. Press MASTER VOL +/– on the remote or rotate
VOLUME on the receiver.
Notes
• The front balance, center level, surround level,
surround back level and subwoofer level are shown
in the display during adjustment.
• To enjoy better sound quality, do not turn up the
volume of the subwoofer too high.
15 GB