Download  Print this page

Power On Screen; To Begin Monitoring Immediately; Maternal Main Screen - Philips 50 XM Series Instructions For Use Manual

Fetal/maternal monitors.
Hide thumbs


Power on Screen

Power on Screen

To Begin Monitoring Immediately

Maternal Main Screen

When you first switch on, the monitor displays its power on screen, with
factory set default alarm limits.
Step 1. Switch the monitor on.
Step 2. Apply the blood pressure cuff, MECG transducer and SpO
transducer to the patient as required.
Step 3. Press ON to turn all maternal alarms on simultaneously with
their factory set default limits or OFF to turn all maternal
alarms off simultaneously.
The monitor displays the maternal main screen. You will find out how to
change and set the alarm limits later in this guide.
The screen that you will view most often is the maternal main screen.
When the monitor is displaying this screen, you can view all the maternal
vital signs at a glance, see which parameter alarms are on, and which
Chapter 14 - Maternal Monitoring - Overview


Table of Contents

This manual is also suitable for:

50 xmo seriesM1350cM1350b

Comments to this Manuals

Symbols: 0
Latest comments: