Preparing For Hdmi Control Function; To Enjoy Tv Multi Channel Surround Sound Broadcasting; Before Using Hdmi Control Function - Sony Stereo Receiver User Manual

To enjoy TV multi channel
surround sound broadcasting
You can listen to TV multi channel surround
sound broadcasting from the speakers
connected to the receiver.
Connect the OPTICAL output jack of the TV
to the OPTICAL IN jack of the receiver.
4
GB
Preparing for HDMI
CONTROL function
Before using HDMI CONTROL
function
Be sure you have performed the following
procedures. For details on setting the TV and
connected components, see the operating
instructions of the respective components.
1
Make sure that the receiver is connected to
the TV and components (compatible with
HDMI CONTROL function) via HDMI
connection.
2
Turn on the receiver, TV and connected
components.
3
Set the respective HDMI CONTROL
function for the receiver and TV to on.
See "To set HDMI CONTROL" below.
When the receiver menu is displayed on the
TV screen in the screen mode, press SHIFT
and MENU to enter the display mode, then
check the TV display image of the
component connected to the receiver.
4
Select the HDMI input of the receiver and
TV to match the HDMI input of the
connected component, so that the image
from the connected component is displayed
on the TV screen.
5
Set the HDMI CONTROL function for the
connected component to on.
If the HDMI CONTROL function is already
set to on, you do not need to change the
setting.
6
Repeat steps 4 to 5 for other components
that you want to use the HDMI CONTROL
function.