1. Manuals
  2. Brands
  3. Sony Manuals
  4. Stereo Receiver
  5. CAV-M1000ES
  6. Installation manual

Sony CAV-M1000ES Installation Manual

Sony owner's record integrated av system cav-m1000es
Hide thumbs Also See for CAV-M1000ES:
Table of Contents

Advertisement

Quick Links

See also: Service Manual
Custom Integrated
AV System
Installation Manual
Owner's Record
The model and serial numbers are located on the rear panel. Record the model
and serial numbers in the spaces provided below. Refer to them whenever you
call upon your Sony dealer regarding this product.
Model No.
CAV-M1000ES
2004 Sony Corporation
4-253-728-11(2)
Serial No.

Advertisement

Table of Contents
loading

Related Manuals for Sony CAV-M1000ES

Summary of Contents for Sony CAV-M1000ES

  • Page 1 Owner’s Record The model and serial numbers are located on the rear panel. Record the model and serial numbers in the spaces provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Model No. CAV-M1000ES...
  • Page 2 1-800-822-8837, or visit http:// www.rbrc.org/ Caution: Do not handle damaged or leaking Nickel Metal Hydride batteries. Welcome! Thank you for purchasing the Sony Custom Integrated AV System. Before operating the unit, please read this manual thoroughly and retain it for future reference.

  • Page 3: Table Of Contents

    ABLE OF ONTENTS Chapter 1 Getting Started Features 4 Unpacking 6 Parts and Controls 7 Before Customizing the System Chapter 2 Setting up the Main Unit Installing the Main Unit 15 Hooking up the Main Unit 17 Selecting the Source and the Volume Level of the Main Unit 19 Setting up the Remote Code and the Baud Rate –...

  • Page 4: Getting Started

    Chapter 1 Getting Started This chapter provides you with information on the features of the system, its accessories, and the parts and controls of each component. Features You can control up to eight audio/video sources in up to six zones with this Custom Integrated AV System. The system consists of: –...
  • Page 5 • RS232C port (Front): Allows you to connect the Main Unit to your computer to update the settings or firmware. • RS232C ports (Rear): Allow you to connect a Sony DVD Mega Changer (ex. DVP-CX777ES) and a Sony A/V Receiver (ex. STR-DA5000ES) to the Main Unit.

  • Page 6: Unpacking

    Unpacking The CAV-M1000ES system includes the following components: • CAV-M1000ES Main Unit • RM-TP100 RF Remote Control • RMB-TP100 Charger cradle for the RF Remote Control • Ferrite core • AN-M1000 RF Antenna • AC power cord • Plug-in 4-terminal screw-type connector for speaker (6) •...

  • Page 7: Parts And Controls

    Parts and Controls Front panel of the Main Unit 1 ?/1 (POWER) switch Press to turn the power on or off. 2 Learning IR window Used to input remote codes into the Main 3 Display window Displays various information. 4 Mode indicators Display the current mode.
  • Page 8 IR emitter to control any IR-controlled component such as a lighting system or motorized screen. qk CONTROL A1II (page 17) Hooks up to a Sony CD Mega Changer (ex. CDP- CX455) equipped with a matching jack allowing the Main Unit to control the source component.
  • Page 9 Main Unit to be controlled by other RS232C components, or to control other components that communicate via RS232C, such as a Sony DVD Mega Changer (ex. DVP-CX777ES) or a Sony A/V Receiver (ex. STR-DA5000ES). Use an RS232C cross cable for the connection.
  • Page 10 Parts and Controls Front panel of the Keypad POWER 1 IR sensor Receives IR signals from the IR Remote Control for the Keypad (supplied) to control both source components and the system. 2 SELECT Press to select a menu on the LCD display, such as a source menu, a disc title list, etc.
  • Page 11 Rear panel of the Keypad qh Brightness adjustment hole (page 29) The hole is located on the side. Use a flathead screwdriver to adjust the brightness of the background of the display window. qj TO SPEAKERS (page 28) Connects speaker cords to the speakers in a zone. qk OUT (page 28) Connects a CAT5 straight cable to the IN jack of the subsidiary Keypad when used in a single room.
  • Page 12 DVD player. qg TV VOL +/– Press to adjust the Sony TV volume. qh TV CH +/– Press to change the Sony TV channel. qj ?/1 switch Press to turn the Keypad on/off.
  • Page 13 SLEEP DIMMER SELECT LOCK PAGE DOWN TOP MENU/ GUIDE DISPLAY RETURN/EXIT TV VOL TV CH FOLDER TV/VIDEO * Only a Sony TV monitor can be controlled with these buttons. > 10 ENTER DISC SOURCE MENU MUTING VOLUME...

  • Page 14: Before Customizing The System

    Setting up the RF Remote Control - Customize the RF Remote Control on your computer. For detailed information on the RF Remote Control, please consult your nearest Sony dealer. Planning the system Before setting up the system, plan the system configuration.

  • Page 15: Setting Up The Main Unit

    Chapter 2 Setting up the Main Unit This chapter provides you with information on the Main Unit regarding installation, hookups and settings. Installing the Main Unit When you mount the Main Unit, note the following: • Place the Main Unit on a flat and level surface. •...
  • Page 16 Installing the Main Unit If you install the Main Unit in a closed cabinet, attach two small boxer fans in the cabinet to provide continuous ventilation. Boxer fan (55 CFM) Boxer fan (55 CFM) centered 7 inches centered 2 inches (177.8 mm) on top of (50.8 mm) behind the the Main Unit...

  • Page 17: Hooking Up The Main Unit

    Hooking up the Main Unit Before hooking up the Main Unit, be sure the power cord is unplugged. Refer to the figures below for the connections. Source component hookups AUDIO IN jack (A) Hook up the audio output of each source component and the AUDIO IN jack of each SOURCE connection jack of the Main Unit.
  • Page 18 Hooking up the Main Unit Output component hookups AUDIO OUT jack (F) Hook up the AUDIO OUT jack of each SOURCE connection jack of the Main Unit and each audio input of the external A/V receiver. Use RCA audio cables. VIDEO OUT jack (G) Hook up the VIDEO OUT jack of each SOURCE connection jack of the Main Unit and each video input of...

  • Page 19: Selecting The Source And The Volume Level Of The Main Unit

    Selecting the Source and the Volume Level of the Main Unit Selecting the source for each zone In the NORMAL mode, you can select a source component for each zone. The status information for each zone appears on the display window. Select a zone by pressing the ZONE + or ZONE –...

  • Page 20: Setting Up The Remote Code And The Baud Rate - Setup Mode

    “READY!” appears in the display window. You are now ready to transfer data between the Main Unit and your computer. Set up the Main Unit using the CAV-M1000ES Editor software . For details, see the Operating Instructions of the CAV- M1000ES Editor software.

  • Page 21: Learning The Remote Code For A Connected Component - Learn Mode

    Learning the Remote Code for a Connected Component – LEARN Mode You can enter any remote codes, even if the remote code that you want to enter is not preset in the SETUP mode. Learning the remote code - CODE LEARNING Press MODE repeatedly until “<<LEARN>>Tt”...
  • Page 22 Learning the Remote Code for a Connected Component – LEARN Mode You can add new remote codes using EXPAND CODE. Adding a new remote key - EXPAND CODE Press MODE repeatedly until “<<LEARN>>Tt” appears in the display window, then press ENTER. “WHICH MENU?”...

  • Page 23: Testing Learned Remote Code - Check Mode

    Viewing disc information – DISC SEARCH By connecting a Sony DVD Mega Changer to an RS232C jack, or a Sony CD Mega Changer to CONTROL A1II, you can view disc information, such as a disc title. Turn off the power.
  • Page 24 Customizing the Main Unit – INSTALLATION Mode Adjusting the source input offset – SOURCE INPUT OFFSET You can keep the volume balance among source components by taking an average of the output level from each source component. Turn off the power. Press and hold ZONE + and ALL ZONE MUTING simultaneously, and then turn on the power.
  • Page 25 Viewing the version information – CIS VERSION CIS VERSION provides you the version information of the Main Unit and other external components, such as an FM/AM Receiver (STR), a DVD Mega Changer, an RF Remote Control, or the Keypad. Turn off the power. Press and hold ZONE –...

  • Page 26: Setting Up The Keypad

    Chapter 3 Setting up the Keypad This chapter provides you with information regarding installation, hookup and settings for the optional Keypad. Installing the Keypad A Keypad must be installed in a junction box (not supplied). Follow the procedures below to mount a Keypad mounting bracket and a Keypad on the wall.
  • Page 27 Insert the top of the Keypad onto the mounting bracket first, in the direction of the arrow 1 until it clicks, then push the bottom of the Keypad onto the bracket in the direction of the arrow 2. Fix and tighten the Keypad mounting screws as shown below.

  • Page 28: Hooking Up In Each Zone

    Hooking up in Each Zone You must install at least one Keypad and a pair of speakers in each zone. In the zones where both audio and video will be installed, you must install at least one TV monitor. Requirements for these hookups are as follows. •...

  • Page 29: Customizing The Keypad

    Customizing the Keypad Setting bass and treble You can adjust bass and treble to optimize the acoustic conditions in each zone. Turn off the power. Press and hold MUTING and PAGE simultaneously, and then press POWER. The LCD panel changes to the Bass and Treble setup mode.

  • Page 30: Testing The Components

    Testing the Components It is recommended that you test all the components before you finish with the installation of the entire system in each zone so as not to encounter any problems after the installation is completed. Check to see if the Main Unit, the installed components, and the Keypad operate properly by testing each operation.

  • Page 31: Other Information

    Do not use any type of abrasive pad, scouring powder, or solvent, such as alcohol or benzine. If you have any questions or problems concerning the Main Unit, please consult your nearest Sony dealer.

  • Page 32: Troubleshooting

    If you experience any of the following difficulties while using the player, use this troubleshooting guide to help you to remedy the problem. Should any problem persist, consult your nearest Sony dealer. There is no sound, no matter which component is selected.

  • Page 33: Error Messages

    Error Messages Main Unit If any of the messages below appear on the Display window of the Main Unit, check the following table to solve the problem. If any problem persists, consult your nearest Sony dealer. Message Cause PROTECTOR ZONE1 Protective device in zone 1 has been activated.

  • Page 34: Specifications

    Specifications CAV-M1000ES Main Unit Audio (each channel) Continuous average power output (FTC) All channels: 30 W per channel min. RMS at 8 ohms, any two channels driven from 20 Hz to 20 kHz with no more than 0.09 % THD.

  • Page 35: Appendix

    Following tables show preset remote control code for each source and common component. You can preset the remote control code using the CAV-M1000ES Editor and the RM-TP100 Editor software on your computer. You can also customize the remote control code by learning the original code of the component in the dashed area using the Main Unit and the Remote Control of the component.
  • Page 36 Remote control source code Remote control source codes are for source components. Source codes marked in dark gray can be preset only by a Sony product. Those codes marked in light gray below can be preset into the Sony products and the products of other manufacturers.
  • Page 37 Notes • Sony’s DVD MEGA and TUNER (STR) are the source components connected with RS232C cables. • When you want to enter a remote control code for a TUNER (STR), connect its 2ND ROOM output to the source input of the Main Unit.
  • Page 38 Remote control common code Remote control common codes marked in dark gray can be preset only by a Sony product. Those codes marked in light gray below can be preset into the Sony products and the products of other manufacturers. However, some codes in light gray may not be available depending on the manufacturer, or may perform differently from the code command as it says.

  • Page 39: Using The Rf Remote Control

    Doing so may solve the problem. Some kind of trouble has occurred. Contact your nearest Sony dealer. The internal battery is being charged on the charger cradle. The remaining power of the battery is low.

  • Page 40: Using The Keypad

    Using the Keypad Turning the Keypad on or off Press POWER to turn the Keypad on. To turn the Keypad off, press POWER again. Selecting and controlling the source Press SELECT next to the desired source displayed in the LCD window. The selected source is activated.

  • Page 41: Using The Ir Remote Control For The Keypad

    Using the IR Remote Control for the Keypad Buttons marked in gray are used to control the source components. Inserting batteries into the Remote Control Insert two R06 (size-AA) batteries into the battery compartment with the + and – correctly oriented to the markings.

  • Page 42: Index

    Index AC IN 9,18 AC power cord 9, 18, 39 Adding a new remote key 22 Adjusting Volume 19, 39, 40, 41 Source input offset ALL CLEAR 24, 25 ALL ZONE MUTING button 7, 19 ANTENNA jack 8 AUDIO IN jack 8, 17 AUDIO OUT jack 8, 18 BACK button...
  • Page 43 O, P OUT jack PAGE button 10, 12 PAUSE button 10, 12 PC SETUP Planning the system PLAY button 10, 12 POWER switch 7, 10 Precautions PROGRAM button Removing the Keypad RS232C connector 7, 9, 17 RF Antenna 16, 18 RF Remote Control 9, 39 SCROLL button 10...
  • Page 44 Sony Corporation Printed in Malaysia...

Table of Contents