Advertisement
Specifications
Speaker
Coaxial 2-way:
Woofer 13 cm,
polypropylene cone type
Tweeter 3 cm,
PEI, balance dome type
Maximum input power 120 W
Rated input power
30 W
Impedance
4 ohms
Sensitivity
90 dB/W/m
Frequency response
40 – 30,000 Hz
Mass
Approx. 630 g per speaker
Design and specifications are subject to change without notice.
Dimensions
20.5
Unit: mm
ø 137.5
3
48*
* Mounting depth
13cm Coaxial
2-way Speaker
Instructions
XS-F1320SL
Sony Corporation
Precautions
•Do not continuously drive the speaker system over the power handling capacity.
•Keep recorded tapes, watches, and personal credit cards using magnetic coding away from the
speaker system to protect them from damage caused by the magnets in the speakers.
If you cannot find an appropriate mounting location, consult your car dealer or your nearest Sony
dealer before mounting.
3-046-196-11 (1)
2000
Printed in China
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Sony XS-F1320SL
Summary of Contents for Sony XS-F1320SL
-
Page 1: Specifications
•Keep recorded tapes, watches, and personal credit cards using magnetic coding away from the speaker system to protect them from damage caused by the magnets in the speakers. If you cannot find an appropriate mounting location, consult your car dealer or your nearest Sony dealer before mounting. - Page 2 •Be careful that speakers are out of the way of the window cranks, door handles, and arm rests. If you cannot find an appropriate mounting location, check with your car dealer or consult the nearest Sony dealer. Mounting example Mark the four bolt holes. Make them 3.3 mm* in diameter.
Need help?
Do you have a question about the XS-F1320SL and is the answer not in the manual?
Questions and answers