Download Print this page

Belling WD14v Users Manual & Installation Handbook page 8

Hide thumbs

Advertisement

DESCRIPTION OF CONTROL
DOOR OPEN BUTTON
IMPORTANT:
A SPECIAL SAFETY DEVICE PREVENTS THE DOOR FROM
OPENING AT THE END OF THE WASH/SPIN CYCLE. AT THE
END OF THE SPIN PHASE WAIT UP TO 1 MINUTE BEFORE
OPENING THE DOOR.
PROGRAMME SELECTOR WITH OFF POSITION
ROTATES IN BOTH DIRECTIONS.
THE MACHINE IS TURNED ON BY SELECTING A
PROGRAMME VIA THE PROGRAMME SELECTOR.
THIS STATUS WILL BE INDICATED BY THE STOP
INDICATOR LIGHT FLASHING, THIS LIGHT WILL
CONTINUE TO FLASH UNTIL THE MACHINE HAS STARTED
OR THE MACHINE IS RETURNED TO THE OFF POSITION.
Press the "Start/Pause" button to start the selected cycle.
The programme carries out with the programme selector
stationary on the selected programme till cycle ends.
Switch off the washing machine by turning the selector to OFF.
NOTE:
THE PROGRAMME SELECTOR MUST BE RETURN TO THE
OFF POSITION AT THE END OF EACH CYCLE OR WHEN
STARTING A SUBSEQUENT WASH CYCLE PRIOR TO THE
NEXT PROGRAMME BEING SELECTED AND STARTED.
DOOR LOCKED INDICATOR
The "Door Locked" indicator light is illuminated when the door
is fully closed and the machine is ON.
When START is pressed on the machine with the door closed
the indicator will flash momentarily and then illuminate.
If the door is not closed the indicator will continue to flash.
A special safety device prevents the door from being opened
immediately after the end of the cycle. Wait for 1 minute after
the wash cycle has finished and the Door Locked light has
gone out before opening the door. At the end of cycle turn
the programme selector to OFF.
14
DELAY START BUTTON
Appliance start time can be set with this button, delaying the
start by 3, 6 or 9 hours.
A
Proceed as follows to set a delayed start:
Select a programme ("STOP" indicator light blinks)
Press "Delay Start" button (each time the button is pressed the
1 min.
start will be delayed by 3, 6 or 9 hours respectively and the
corresponding light will blink).
Press "Start/Pause" to commence the Delay Start operation
(the indicator light associated with the selected Delay Start
time stops blinking and remains ON).
At the end of the required time delay the programme will
start.
To cancel the Delay Start function :
press the "Delay Start" button until the indicator lights will be
off (The "STOP" light blinks) and the programme can be
B
started manually using the "Start/Pause" button or switch off
the appliance by turning the programme selector to "OFF"
position.
TIME COUNTDOWN SYSTEM INDICATOR LIGHTS
In order to better manage your time, this washing machine
features an indicator light system that keeps you constantly
informed on the remaining cycle time.
Indicator light 90:
Remaining time above 60 minutes
Indicator light 60:
Remaining time less than 60 minutes
Indicator light 30:
Remaining time less than 30 minutes
Indicator light 15:
C
Remaining time less than 15 minutes
Indicator light Stop:
End of the programme.
WARNING: IF THERE IS ANY BREAK IN THE POWER
SUPPLY WHILE THE MACHINE IS OPERATING, A SPECIAL
MEMORY STORES THE SELECTED PROGRAMME AND,
WHEN THE POWER IS RESTORED, IT CONTINUES WHERE IT
LEFT OFF.
D
E
15

Hide quick links:

Advertisement

loading

  Related Manuals for Belling WD14v

  Related Products for Belling WD14v

This manual is also suitable for:

Wm14viWd12v