Download Print this page

Safety Measures - Belling WD14v Users Manual & Installation Handbook

Hide thumbs

Advertisement

CHAPTER 3

SAFETY MEASURES

IMPORTANT:
FOR ALL CLEANING AND MAINTENANCE WORK
Remove the plug
Turn off the water inlet tap.
All Belling appliances are earthed. Ensure that the main
electricity circuit is earthed. Contact a qualified electrician if
this is not the case.
Appliance complies with European Directives
73/23/EEC and 89/336/EEC, replaced by 2006/95/EC and
2004/108/EC, and subsequent amendments.
Do not touch the appliance with wet or damp hands or
feet.
WARNING: DURING THE WASHING CYCLE, THE WATER
CAN REACH A TEMPERATURE OF 90°C.
Before opening the washing machine door, ensure that
there is no water in the drum.
6
Do not use extension leads or multiple plugs.
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not
play with the appliance.
Do not pull the mains lead or the appliance itself to
remove the plug from the socket.
Do not leave the appliance exposed to atmospheric
conditions (rain, sun etc.)
In the case of removal, never lift the appliance by the
knobs or detergent drawer.
During transportation do not lean the door against the
trolley.
Important!
When the appliance location is on carpet floors, attention
must be paid so as to ensure that there is no obstruction to
the bottom vents.
Lift the appliance in pairs as illustrated in the diagram.
In the case of failure and/or incorrect operation, turn the
washing machine off, close the water inlet tap and do not
tamper with the appliance. Contact a Technical Assistance
Centre for any repairs and ask for original spare parts.
Avoidance of these norms may compromise the safety of
the appliance.
Should the supply cord (mains cable) be damaged, this is
to be replaced by a specific cable available from the after
sales service centre.
7

Hide quick links:

Advertisement

loading

  Related Manuals for Belling WD14v

This manual is also suitable for:

Wm14viWd12v