Table of Contents
Advertisement
Tips
• When switching to “CD” function from
“TUNER” function by pressing NX, a
longer time may be required to access the disc.
In this case, set “CD POWER ON” by CD
power manage function (page 20).
• If you press NX while the system is turned
off, the system turns on automatically and
“CD” function is selected. Then, playback
starts if there is a disc in the disc tray (One
Touch Play).
Listening to the radio
1
Press TUNER/BAND (or
FUNCTION +/– on the remote)
repeatedly to select FM or AM
band.
2
Press TUNING MODE repeatedly
until “AUTO” lights up in the
display.
3
Press TUNING +/– (or +/– on the
remote).
Scanning stops automatically when a
station is tuned in and “TUNED” lights
up in the display. When a FM stereo
program is tuned in, “ST” lights up in
the display.
Note
If “TUNED” does not light up and scanning
does not stop, see “To improve tuner
reception” below.
4
Turn VOLUME +/– (or press
VOLUME +/– on the remote) to
adjust the volume.
To stop automatic scanning
Press ENTER (or
on the remote).
To improve tuner reception
When the tuner reception is poor, set the
CD power manage function to “CD
POWER OFF”.
The default setting is “CD POWER ON”.
Use buttons on the unit for the operation.
1
Press FUNCTION repeatedly to
select “CD”.
2
Press ?/1 to turn off the system.
3
Press ?/1 while holding down x.
The system turns on automatically.
“CD POWER OFF” appears in the
display.
l
Continued
US
Page 19
Hide quick links:
Advertisement
Table of Contents
