Specifications; Ordering Information - Honeywell V5013N Product Data

V5013N THREE-WAY THREADED GLOBE VALVE

SPECIFICATIONS

IMPORTANT
The specifications given in this publication do not
include normal manufacturing tolerances. Therefore,
an individual unit may not exactly match the listed
specifications. Also, this product is tested and
calibrated under closely controlled conditions and
some minor differences in performance can be
expected if those conditions are changed.
Models:
V5013N Valve: Three-way mixing valve for water or glycol.
NPT-threaded pipe connections. Constant total flow. Push
down valve stem to close bottom (B) port.
Valve Sizes and Flow Capacities:
See Table 1.
Table 1. Valve size and flow capacities.
Valve Body Pipe Size (in.)
1/2
1/2
3/4
1
1-1/4
1-1/2
2
Pipe Connections:
Female NPT-threaded connections.
Motor and Linkage Selection:
Electric
ML6421/ML6425
ML7421/ML7425
ML7984/ML6874
Mod IV w/Q5001

ORDERING INFORMATION

When purchasing replacement and modernization products from your TRADELINE® wholesaler or distributor, refer to the
TRADELINE® Catalog or price sheets for complete ordering number.
If you have additional questions, need further information, or would like to comment on our products or services, please write or
phone:
1. Your local Home and Building Control Sales Office (check white pages of your phone directory).
2. Home and Building Control Customer Logistics
Honeywell Inc., 1885 Douglas Drive North
Minneapolis, Minnesota 55422-4386 (612) 951-1000
In Canada—Honeywell Limited/Honeywell Limitée, 155 Gordon Baker Road, North York, Ontario M2H 3N7.
International Sales and Service Offices in all principal cities of the world. Manufacturing in Australia, Canada, Finland, France,
Germany, Japan, Mexico, Netherlands, Spain, Taiwan, United Kingdom, U.S.A.
63-2549
Flow Capacity (C )
v
2.9
4.7
7.3
11.7
18.7
29.3
46.8
Pneumatic
MP953
2
Seat:
1/2 in.; Replaceable stainless steel (upper), replaceable
brass (lower).
3/4 in. to 2 in.; Integral brass (upper), replaceable brass
(lower).
ANSI Body Class:
150 psi.
Stem:
Stainless steel.
Plug:
Brass.
Stroke:
3/4 in. (20 mm).
Approximate Leakage Rate:
0.05 percent C .
v
Body Material:
Red brass.
Packing:
Spring-loaded, carbon fiber reinforced PTFE V-rings.
Pressure-Temperature Ratings:
Water: 36°F to 248°F, 227 psi.
248°F to 340°F, 211 psi.
Valve Flow Characteristics:
Equal percentage port A-AB, linear port B-AB. Movement of
the valve stem at any point of the flow range does not
significantly change the total flow rate at the AB outlet port
(constant total flow).
Close-Off Pressure Ratings:
See Fig. 1 and Table 2.