Specifications - Makita DLS713 Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Blade diameter
Hole (arbor) diameter
Max. kerf thickness of the saw blade
Max. Miter angle
Max. Bevel angle
No load speed (RPM)
Dimensions (L x W x H)
Rated voltage
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
Max. Cutting capacities (H x W) with blade 190 mm (7-1/2") in diameter.
45° (left and right)
(Note)
* mark indicates that a wood facing with the following thickness is used.
1: When using a wood facing 20 mm thickness
2: When using a wood facing 15 mm thickness
3: When using a wood facing 10 mm thickness
Model
Net weight
Miter angle
0°
57° (right)
655 mm x 430 mm x 454 mm (25-3/4" x 17" x 17-7/8")
12.2 - 14.3 kg (27.0 - 31.6 lbs)
BL1815N / BL1820B / BL1830 / BL1830B / BL1840B / BL1850B / BL1860B
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF
45° (left)
25 mm x 300 mm
(1" x 11 - 3/4") (2 - 1/16" x 11 - 3/4")
-----
25 mm x 212 mm
(1" x 8 - 3/8") (2 - 1/16" x 8 - 3/8")
-----
-----
(2 - 1/16" x 6 - 3/8")
-----
2 ENGLISH
DLS713
190 mm (7-1/2")
15.88 mm (5/8")
2.2 mm (3/32")
Left 47° , Right 57°
Left 45°, Right 5°
2,200 /min
D.C. 18 V
Bevel angle
0°
52 mm x 300 mm 40 mm x 300 mm
(1 - 9/16" x 11 - 3/4")
* 60 mm x 265 mm
(Note 1)
(2-3/8" x 10-3/8")
52 mm x 212 mm
* 60 mm x 185 mm
(Note 2)
(2-3/8" x 7-1/4")
52 mm x 163 mm
* 60 mm x 145 mm
(Note 3)
(2-3/8" x 5-3/4")
5° (right)
-----
-----
-----
-----
-----