Table of Contents
Advertisement
Pairing the TV to the Samsung Smart Remote
1>[]0
When you turn on the TV for the first
time,
the Samsung Smart Remote pairs
to the TV automatically. If the Samsung Smart Remote does not pair to the TV
automatically, point it at the remote control sensor of
the
TV, and then press
and hold the buttons labeled
eand
Oas
shown in the figure on the left
simultaneously for 3 seconds or more.
Installing batteries into the Samsung Smart Remote
0
0
1. Press the .A. button at the top rear of the Samsung Smart Remote. The body will pop out slightly from the body
cover.
2.
Turn the remote over, and then slide the body of the remote upwards until the battery compartment
is
revealed.
3.
Press the ..
and~
buttons at both
sides
of the battery
compartment
to remove the existing
batteries.
4.
Insert two new batteries (l.SV AAA type) into the battery
compartment
making sure that the batteries'
polarities(+,-) are oriented correctly. When done, slide the body of
the
remote until it is nearly in its original
position.
5. Turn the remote over, press and hold the .A. button on the top rear, and then slide the body of
the
remote down
into place.
• Alkaline batteries
are
recommended for longer battery life.
English
-
12
Advertisement
Table of Contents
