Connecting With Single Set Of Terminals - Sony SA-W305 Operating Instructions Manual

Getting Started
Connecting to an amplifier with a single set
of speaker terminals
If your amplifier is equipped with a single set of
speaker terminals, connect the woofer to the amplifier,
and then connect the front speakers to the woofer.
What cords will I need?
Speaker cord (supplied) (1 for each speaker)
Twist the stripped ends of the cord about
Be sure to match the speaker cord to the appropriate
terminal on the componentes: + to + and – to –. If the cords
are reversed, the sound will be distorted and will lack bass.
It is useful to decide that the speaker cord marked with a
line is always the positive (+) and should be connected to the
positive (+) terminal to avoid any improper connections.
Hookups
1
Connect the woofer to the amplifier.
Connect the SPEAKER IN terminals of the woofer
to the amplifier's speaker terminals with the
speaker cords. Be sure to connect both L and R
channels.
ç: signal flow
2
Connect the front speakers to the woofer.
Connect the speakers to the speaker terminals of
the woofer.
Front
Speaker (R)
EN
6
2
/ inch (15 mm).
3
Amplifier
SPEAKER
This woofer
IN OUT
+ +
L L
– –
– –
R R
+ +
SPEAKER
This woofer
IN OUT
+ +
L L
– –
Front
– –
R R Speaker (L)
+ +
SPEAKER
Connecting to an amplifier with
double(A+B) sets of speaker terminals
If your amplifier has double(A+B) sets of speaker
terminals, connect both the woofer and the front
speakers to the amplifier.
What cords will I need?
Speaker cord (supplied) (1 for each speaker)
Twist the stripped ends of the cord about
Hookups
1
Connect the front speakers to the amplifier.
Connect the speakers to your amplifier's speaker
terminals (A).
Amplifier
SPEAKER A
Front
Speaker (R)
2
Connect the woofer to the amplifier.
Connect the SPEAKER IN terminals of the woofer
to the amplifier's speaker terminals (B) using
speaker cords (supplied).
Amplifier
SPEAKER B
This woofer
IN
+
L
–
–
R
+
SPEAKER
When using the double (A +B) sets of speakers, make
sure that you select the "A +B" position with your
amplifier.
Note
When you are using speaker terminal (A) only (front speaker
only) or when the power of the amplifier is turned off, turn
down the volume or turn off the power of the woofer
otherwise, hum noise may be heard.
2 / inch (15 mm).
3
Front
Speaker (L)
OUT
+
L
–
–
R
+