Mitsubishi Electric FR-D700 Series Instruction Manual page 15

2.3.3 Terminal arrangement of the main circuit terminal, power supply and the motor wiring
Three-phase 200V/400V class

FR-D720-0.1K to 0.75K
N/-
R/L1 S/L2 T/L3
Power supply
FR-D720-5.5K, 7.5K
FR-D740-5.5K, 7.5K
N/- P/+ PR R/L1 S/L2 T/L3
Jumper
Power supply Motor
FR-D740-11K, 15K
N/- P/+ PR R/L1 S/L2 T/L3
Jumper
Power supply
Single-phase 200V class

FR-D720S-0.1K to 0.75K
N/-
R/L1 S/L2
Power supply
Single-phase 100V class

FR-D710W-0.1K to 0.4K
N/-
R/L1 S/L2
Power supply
NOTE
 Make sure the power cables are connected to the R/L1, S/L2, T/L3. (Phase need not be matched.) Never connect the
power cable to the U, V, W of the inverter. Doing so will damage the inverter.
 Connect the motor to U, V, W. Turning ON the forward rotation switch (signal) at this time rotates the motor
counterclockwise when viewed from the load shaft.
Jumper
P/+ PR
IM
Motor
IM
IM
Motor
Jumper
P/+ PR
IM
Motor
P/+ PR
IM
Motor
FR-D720-1.5K to 3.7K
FR-D740-0.4K to 3.7K
N/- P/+
Jumper
R/L1 S/L2 T/L3
PR
Power supply
FR-D720-11K, 15K
R/L1 S/L2 T/L3 N/-
Power supply
FR-D720S-1.5K, 2.2K
Jumper
N/- P/+
R/L1 S/L2
PR
Power supply
FR-D710W-0.75K
N/- P/+
R/L1 S/L2
PR
Power supply
Wiring
IM
Motor
P/+ PR
Jumper
IM
Motor
IM
Motor
IM
Motor
11
2