Changing The Battery - Sony RDH-SK8iP Operating Instructions Manual

Speakers/stands: home audio docking system
Hide thumbs Also See for RDH-SK8iP:
Table of Contents

Advertisement

Changing the battery

The working distance of the remote
shortens as the battery becomes
exhausted. When the remote no longer
operates the unit, replace the battery with
a new CR2025 lithium battery.
1
Push and hold the latch of the
battery holder, then pull out the
battery holder.
Latch
2
Replace the battery with the "+"
facing up, then insert the battery
holder into the slot.
GB
12
+ facing up
Battery
holder
Notes
• If you do not use the remote for a long period
of time, remove the battery to avoid possible
damage from battery leakage and corrosion.
• Dispose of used battery promptly. Keep the
lithium battery out of the reach of children.
Should the battery be swallowed, immediately
consult a doctor.
• Wipe the battery with a dry cloth to assure a
good contact.
• Be sure to observe the correct polarity when
installing the battery.
• Do not hold the battery with metallic
tweezers, otherwise a short-circuit may occur.
• Use of batteries other than the CR2025 may
cause a fire or explosion.
WARNING
Battery may explode if mistreated.
Do not recharge, disassemble or
dispose of in fire.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents