Sony CD-PC50 Operating Instructions Manual page 8

Byusing t heDISC SELECT buttons o rtheDISC SKIP button
during p lay, y ou canlocate thebeginning ofany disc.
To
select a particular disc Press the
corresponding DISC
SELECT button.
To move to the disc tray next Press DISC SKIP.
to the current one
Locating a point in sequence (Manual Search)
You can locate a particular point in a selection during play by
monitoring the high-speed sound.
To go back at high speed
To go ahead at high speed
Keep <1<1pressed.
Keep _ pressed.
Release the button when you reach the point in tile selection
you want.
Locating a selection in sequence (Automatic Music
Sensor)
You can locate the beginning of a selection on the disc being
played.
To locate the beginning of the
selection beingPlayed Press _ once.
To locatethe beginning of the
nextselection. Press IH_ once.
Continue to press until the selection you wanted has been
located.
Locating a selection directly
(possible only when using the remote commander of the
CDP-C50)
Press the numeric buttons (1 to 10) to enter the desired track
number.
To choose directly • selection whose number Is greater than 10
(possible only when using the remote commander of the CDP-CSO)
Use the [_ button and [] to [] buttons.
Ex. To play from track NO. 32 Ex. To play from track No. 30
1 Press +_threetimes. 1 Press[_ twice.
2 Press_]. 2 Press[].
If, within approx. 5 seconds, no button is pressed after [_], [_
will function as the _]button
What is this Indication?
"- - - -" indication will appear in the display window instead of
numbers, if a selection numbered 21 or higher is selected.
To locate at high speed
Press <HI or _ in the pause mode. Search speed will increase
three times, but there will be no sound. Find the desired point by
watching the numbers in the display.