Alignment And Adjustment (Tv - Samsung CXJ1352AX Service Manual

4. Alignment and Adjustments (TV)
4-1 Factory Alignment
4-1-1 Factory Mode Menus
Since there are no VRs in the V15A chassis, all adjustments must be
performed in the "Factory mode." Factory Mode adjustments are necessary
if either the EEPROM (IC902) or the CRT is replaced. Do not attempt to
make adjustments in either the Play Mode or Line-in Mode.
4-1-2 Entering the Factory Mode
Press the following transmitter keys in
STANDBY mode:
MUTE → 1 → 8 → 2 → POWER
"Factory Mode Menu" is displayed
10
PICTURE CONTROL
AGC 45
VCO 40
SCT 30
SCR 20
STT 36
RC 0
GC 0
Example for "VCO" : Use the CH down key to select VCO, and use the
Volume + (or VOL - key) to change the data.
VCO 45
Samsung Electronics
SVC, MUTE
BC 0
GG 128
BG 128
SB 15
VA 36
VS 0
HS 16
Alignment and Adjustments (TV)
4-1