Download  Print this page

Connect Your Tv - Sony SAT-A65 Operating Instructions Manual

Directv digital satellite receiver.
Hide thumbs

Advertisement

Connect your TV

Depending on your TV, you can connect it to the receiver in one of three ways:
In addition to your video connection, use a set of audio cables (L/R) to provide
stereo sound. If your TV does not have audio jacks, you will hear monophonic
audio. This is acceptable for the procedures described in the next section.
To connect your TV to the DIRECTV Receiver:
Onscreen Menu Icons
These icons appear in onscreen menus and are used throughout this manual:
• S-Video cable (best picture quality) or
• Video cable (very good picture quality) or
• Coaxial cable (good picture quality)
1. Select the appropriate connection:
If your TV has an S-Video jack –
• Use an S-Video cable (supplied with SAT-A65 only) to connect the
DIRECTV Receiver's
• Use audio cables to connect the DIRECTV Receiver's
the TV's
AUDIO IN
If your TV has RCA-type A/V connectors –
• Connect the DIRECTV Receiver's
TV's
jacks.
A/V IN
• If your TV has only one
jack to the TV
L
If your TV only has an RF (coaxial) connector –
• Connect the DIRECTV Receiver's
the TV's
VHF/UHF IN
2. Connect one end of the telephone line cord provided into the DIRECTV
Receiver's
PHONE JACK
3. Connect the other end into a modular telephone outlet.
4. Plug the TV into an electrical outlet.
5. Plug the DIRECTV Receiver power cord into an electrical outlet. If the
front panel Power indicator does not illuminate, press the
jack to the TV's
S-VIDEO
jacks.
AUDIO
jack, connect the receiver's
AUDIO IN
jack.
AUDIO IN
VHF (SAT)/UHF OUT
or
jack.
RF IN
.
jack.
S-VIDEO
AUDIO
jacks to
and
jacks to the
VIDEO
AUDIO
connector to
POWER
button.
3
Getting started

Advertisement

Table of Contents

   Also See for Sony SAT-A65

   Related Manuals for Sony SAT-A65

This manual is also suitable for:

Sat-b65Rm-y812

Comments to this Manuals

Symbols: 0
Latest comments: