Connection Example; Connection Diagram - Sony XT-XM1 Operating Instructions

Connection

Connection example

XM Antenna*
XT-XM1
CD/MD changer*

Connection diagram

Connect with a BUS cable to Note
When you use an optional BUS cable, note
the XM Satellite receiver,
that a BUS cable with an 8-pin plug (L-type)
aligning the v marks.
cannot be used because of its shape.
To a +12 V power terminal which
is energized at all times
Be sure to connect the black ground
lead to it first.
To a metal point on the car
First connect the black ground lead,
then connect the yellow power input
leads.
Note
Locate the power cord and the RCA pin cord as far away as possible.
Sony BUS Compatible
Car Audio*
* not supplied
2
Connect with the connector
hook facing down.
Fuse (3 A)
Yellow
Black
Cautions
• This unit is designed for negative ground 12 V DC operation only.
• Before making connections, turn the car ignition off to avoid short circuits.
• Connect the yellow power input cord only after all other cords have been connected.
• Run all ground leads to a common ground point.
SONY BUS CONTROL AUDIO
POWER OUT IN L OUT R L
ANTENNA
IN R TER SAT
Green Yellow
XM antenna
(not supplied)
RCA pin cord
(not supplied)
BUS cable
(not supplied)
4
3
OUT
CD/MD changer
(not supplied)
OUT
IN
Sony BUS Compatible
Car Audio
(not supplied)
IN