Tools And Equipment - Cisco 7000 Series Hardware Installation And Maintenance Manual

Rack-Mounting the Chassis
Figure 3-1

Tools and Equipment

Have the following tools on hand before you begin the rack installation:
•
•
•
•
The rack-mount kit includes the following parts:
•
•
•
When installing the router in an enclosed rack, removing the door temporarily may provide
additional clearance. We recommend that you have someone to assist you by supporting the chassis
while you mount it in the rack by securing the chassis ears to the rack-mounting strips.
3-2 Cisco 7010 Hardware Installation and Maintenance
Typical 19-Inch Equipment Rack Posts and Mounting Strips
18.312"
hole C to C
Mounting strips
17.72" min.
Number 1 and number 2 Phillips screwdrivers
1/4-inch and 3/16-inch flat-blade screwdrivers
Tape measure
Level (optional)
Two chassis ears
Four M3 x 8-mm Phillips flathead screws to secure the ears to the chassis
Eight 10-32 x 3/8-inch slotted binderhead screws to secure the chassis ears to the rack rails
Rack posts
110 VAC
outlets