Download Print this page

Sony VPL-ES4/EX4 Notes

Note on resetting the lamp timer

Advertisement

Quick Links

VPL-ES4/EX4
日本語
ランプタイマーリセット時のご注意
ランプタイマーをリセットするには、リモートコマンダーのキーを RESET キー、
b キー、B キー、ENTER キーの順に押します。
リモートコマンダーからの信号を確実に受信するため、それぞれのキーを押す間隔は、
1 秒以上 5 秒以内にしてください。キーを押す間隔が 1 秒以内では、信号が受け付けられない
場合があります。
ランプタイマーのリセットが受け付けられると、?/1 キー周囲の ON/STANDBY インジケー
ターの赤色が一瞬、消灯します。
English
Note on Resetting the Lamp Timer
When you reset the lamp timer, press the RESET, b, B and ENTER keys on the Remote Commander
in that order.
To assure reception of signals from the Remote Commander, press each key at intervals of 1 to 5
seconds. If the interval is less than 1 second, the projector may not receive the signal from the Remote
Commander.
When resetting of the lamp timer has been done correctly, the red ON/STANDBY indicator around the
?/1 key turns off for a moment.
Français
Remarque concernant la réinitialisation de la minuterie de lampe
Pour réinitialiser la minuterie de lampe, appuyez sur les touches RESET, b, B et ENTER de la
télécommande, dans cet ordre.
Pour assurer la réception des signaux provenant de la télécommande, appuyez sur chacune des touches
à des intervalles de 1 à 5 secondes. Si l'intervalle est inférieur à 1 seconde, il se peut que le projecteur
ne reçoive pas le signal de la télécommande.
Lorsque la réinitialisation de la minuterie de lampe a été effectuée correctement, l'indicateur ON/
STANDBY rouge autour de la touche ?/1 s'éteint pendant un moment.
Sony Corporation © 2007 Printed in China
3-296-140-01 (1)

Advertisement

loading

Summary of Contents for Sony VPL-ES4/EX4

  • Page 1 Lorsque la réinitialisation de la minuterie de lampe a été effectuée correctement, l’indicateur ON/ STANDBY rouge autour de la touche ?/1 s’éteint pendant un moment. Sony Corporation © 2007 Printed in China 3-296-140-01 (1)
  • Page 2 Español Nota sobre el restablecimiento del temporizador de la lámpara Cuando restablezca el temporizador de la lámpara, presione las teclas RESET, b, B y ENTER del mando a distancia en ese orden. Para garantizar la recepción de las señales del mando a distancia, presione cada una de las teclas con intervalos de 1 a 5 segundos.

This manual is also suitable for:

Vpl-es4Vpl-ex4