Silvercrest SDM 1500 D2 Assembly, Operating And Safety Instructions page 9

The product is not to be used if
it has been dropped, if there are
visible signs of damage or if it is
leaking .
Before connecting the product
to the power supply, check that
the voltage and current rating
corresponds with the power
supply details shown on the
product's rating label .
Regularly check the power plug
and the supply cord for damages .
If the supply cord is damaged,
it must be replaced by the
manufacturer, its service agent
or similarly qualified persons in
order to avoid a hazard .
Protect the power cord against
damages . Do not let it hang over
sharp edges, do not squeeze or
bend it . Keep the power cord
away from hot surfaces and
open flames and ensure that
nobody can pull on or trip over it
unintentionally .
The product must not be left
unattended while it is connected
to the supply mains .
The liquid or steam must not
be directed towards equipment
containing electrical components,
such as the interior of ovens .
The filling aperture must not be
open during use .
Burn hazards
m DANGER! Risk of burns!
Do not touch hot surfaces and
beware of escaping steam . Hold
the product by its handle only .
Steam is very hot . Never put your
hands in front of the steam jet .
Operation
Only use the product in dry
indoor rooms .
The plug must be removed from
the wall socket before the water
tank is filled with water .
The use of extension cords is not
recommended . If the use of an
extension cord is necessary, it
must be designed for a current
flow of at least 10 A . Lay cords
in such a way that they may not
be tripped over or otherwise
damaged .
GB/IE/NI 9