Silvercrest SWV 733 B1 Operating Instructions And Safety Instructions page 64

SilverCrest SWV 733 B1
devices do not include an IP address if the address field is completely assigned, even if IP
addresses are no longer actively used. In contrast to the Server option where IP addresses are
automatically assigned and stored in a table. However, the assignment here is not permanent and
end devices are assigned another IP address. The following settings can only be adjusted, if you
have selected the Server option.
IP address
The IP address of the Dual-Band Range Extender is displayed here.
DHCP start
The first IP address for the DHCP range is shown here.
DHCP end
The last IP address for the DHCP range is shown here.
Subnet mask
The IP address of the subnet mask is displayed here.
Click on the Apply button to apply the changed settings.
62 - English