Power Levels And Associated Electrical Power; Switching Off Using The Timer - Silvercrest SDI 3500 B1 Operating Instructions And Safety Instructions

SilverCrest SDI 3500 B1

7.3 Power levels and associated electrical power

Below is a short overview of the different power levels, with power consumption figures in Watts.
Left heating zone (1)
Level
1
2
3
4
5*
6
7
8
9
10
* default power level when switching on heating zone (1) or (3)

7.4 Switching off using the timer

You can program the timer to switch the induction hotplate off automatically after a preset time.
1. When cooking, press the sensor button for the timer
program the timer for this heating zone (1, 3).
2. Use the rotary controller (5 or 6) to set the cooking time you want (hours:minutes) before the heating
zone (1 or 3) is to switch off.
You can program the cooking time to between 00:01 to 3:00 hours.
The time set flashes briefly and then the remaining time (countdown) is shown on the display (8).
If the timer is activated, the indicator (7) lights up and the display (8) alternates showing the power level
or temperature and the remaining time at around 5 second intervals.
If necessary, you can adjust the power level or temperature using the rotary controller (5 or 6).
Once the countdown reaches zero, the corresponding heating zone (1, 3) automatically switches off. A
beeper sounds.
52 - English
Power (Watt)
200
400
600
800
1000
1200
1400
1600
1800
2000
Right heating zone (3)
Level
1
2
3
4*
5
6
7
–
–
–
(13) of the desired heating zone (1, 3) to
Power (Watt)
200
400
600
800
1000
1250
1500
–
–
–