Using The S-Link Function; Using The S-Link Function Without A Sony Av Receiver - Sony KP 48V85 Operating Instructions Manual

Installing and Connecting the Projection TV (continued)

Using the S-Link Function

S-Link is a Sony innovation designed to
make the Sony components work together. It
allows you to automatically switch the
projection TV's input mode to video when
you press the play button on the Sony S-Link
VCR.
Using the S-Link function without
a Sony AV receiver
1
Connect the Sony VCR (DVD). (see
"Connecting a cable TV system/antenna
to a VCR" on page 10 or "Connecting a
DVD Player with component video
output connectors" on page 16)
2
Using an S-LINK cable, connect the
S-LINK jacks on the VCR (DVD) and the
projection TV. Ensure that both ends are
seated firmly and that the projection TV's
S-LINK jack is in the same row as the
AUDIO/VIDEO cable extending from the
Sony VCR (DVD).
20
Refer also to the Operating Instructions
supplied with the VCR, satellite receiver,
DVD player, LD player and other Sony
video equipment for details.
(Rear of projection TV)
IN
VIDEO 1 VIDEO 3 VIDEO 4 VIDEO 5
Y
S VIDEO
P B
VIDEO P
R
L
L
(MONO)
AUDIO
AUDIO
R
R
S-LINK
VIDEO 1 VIDEO 3 VIDEO 4 VIDEO 5
IN
AUDIO-R
AUDIO-L S-LINK
VIDEO
Disconnect all power sources before making any connections.
VMC-10HG
(not supplied)
Y P P
B R
Audio outputs
RK-74A
AUDIO-R
(not supplied)
AUDIO-L
S-LINK
RK-G34, etc.
(not supplied)
Audio/video/S-LINK cable
1
Component video
outputs
LINE OUT S VIDEO OUT COMPONENT VIDEO OUT S-LINK DIGITAL OUT
R–AUDIO 1–L VIDEO Y P B P R OPTICAL COAXIAL
S-LINK
2
Sony VCR
AUDIO R AUDIO L VIDEO S-LINK
LINE
OUT
Audio/video
S-LINK
outputs
1
Sony
DVD