Storage And Disposal; Storage; Inspection During Storage; Disposal - Toshiba HCV-6KALU Instruction Manual

Vacuum contactor
Table of Contents

Advertisement

Page 24

STORAGE

If the contactor is to be stored for any length of
time
prior
to
installation,
precautions should be taken.
1. The original packing should be restored, if
possible.
2. Do not subject the equipment to moisture or
sunrays.
Store in cool, clean, and dry
location.
3. Place a dust cover over the contactor
packaging to protect against dirt and
moisture.
4. Store in an upright position.

INSPECTION DURING STORAGE

Routine scheduled inspection is necessary if
storage is for an extended period. The unit
should be checked for condensation, moisture,
corrosion, and vermin.
Prior to installation, the contactor should be
carefully examined for evidence of physical
damage, corrosion, or other deterioration. Refer
to the PRE-ENERGIZATION Section of this
manual.
The MAINTENANCE section of this manual
describes
various
types
recommended for this contactor during the
operation period.

DISPOSAL

Contact your state environmental agency for
details on disposal of electrical components and
packaging in your particular area.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
the
following
of
inspections

STORAGE AND DISPOSAL

Advertisement

Table of Contents
loading

Subscribe to Our Youtube Channel

This manual is also suitable for:

Hcv-6kau

Table of Contents