Operation; Moving Contactor From The Off To On Position; Moving Contactor From The On To Off Position - Toshiba HCV-6KALU Instruction Manual

Vacuum contactor
Table of Contents

Advertisement

Page 12
MOVING THE CONTACTOR FROM THE OFF
TO THE ON POSITION
TO MOVE THE CONTACTOR TO THE ON
POSITION:
1. Turn ON circuit control power to move the
contactor to the ON position
2. Verify that the position indicator reads ON
(Red).
3. For the latched type contactor, check that
the latch correctly engages and trips when
the close/trip signals are applied.
manually trip the contactor using the trip
lever to verify proper operation.
MOVING THE CONTACTOR FROM THE ON
TO THE OFF POSITION
TO MOVE THE CONTACTOR TO THE OFF
POSITION:
1. Turn OFF circuit control power to move the
contactor to the OFF position
2. Verify that the position indicator reads OFF
(Green).
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Also,

OPERATION

Advertisement

Table of Contents
loading

Subscribe to Our Youtube Channel

This manual is also suitable for:

Hcv-6kau

Table of Contents