To adjust the horizontal guidelines
(FRAME-[5])
The default setting for the three horizontal guideline
positions of FRAME-[5] is the same as that for
FRAME-[1]. You can adjust the position of the
guidelines by performing the following steps.
For the dimensions of prints after adjusting the
guideline positions, see “Dimensions for FRAME-[5]
prints” on page 48.
1
Display the SETUP screen.
For details on displaying the SETUP screen, see
“Displaying the SETUP Screen” on page 30.
2
FRAME by pressing the v or V control
Select
button.
3
Press the ENTER button.
The frame selection screen appears.
4
Select FRAME-[5] by pressing the v or V control
button.
The guidelines for FRAME-[5] appear on the LCD.
5
Adjust the position of the three horizontal
guidelines.
LINE1 indicates the top line, LINE2 the middle
line, and LINE3 the bottom line.
1) Select LINE1 by pressing the B control button.
2) Adjust the position of LINE1 by pressing the v
or V control button.
3) Select LINE2 by pressing the B control button.
4) Adjust the position of LINE2 by pressing the v
or V control button.
5) Select LINE3 by pressing the B control button.
6) Adjust the position of LINE3 by pressing the v
or V control button.
7) Press the ENTER button.
6
Press the ENTER button.
The SETUP screen reappears.
Menus